Inductive sensor NJ40+U2+E2

pepperl

$181.00

'General specifications', 'Switching functionNormally open (NO)', 'Output typePNP', 'Rated operating distance40 mm', 'Installationnon-flush', 'Output polarityDC', 'Assured operating distance0 ... 32.4 mm', 'Reduction factor rAl 0.5', 'Reduction factor rCu 0.45', 'Reduction factor r304 0.8', 'Output type3-wire', 'Nominal ratings', 'Operating voltage10 ... 60 V', 'Switching frequency0 ... 100 Hz', 'Hysteresis1 ... 10 typ. 5 %', 'Reverse polarity protectionreverse polarity protected', 'Short-circuit protectionpulsing', 'Voltage dropâ‰?2.8 V', 'Operating current0 ... 200 mA', 'No-load supply currentâ‰?10 mA', 'Time delay before availabilityâ‰?100 ms', 'Operating voltage indicatorLED, green', 'Switching state indicatorLED, yellow', 'Compliance with standards and directives', 'Standard conformity', 'StandardsEN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012', 'Approvals and certificates', 'UL approvalcULus Listed, General Purpose', 'CSA approvalcCSAus Listed, General Purpose', 'CCC approvalCertified by China Compulsory Certification (CCC)', 'Ambient conditions', 'Ambient temperature-25 ... 70 °C (-13 ... 158 °F)', 'Mechanical specifications', 'Connection typescrew terminals', 'Information for connectionA maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %', 'Core cross-sectionup to 2.5 mm2', 'Minimum core cross-sectionwithout wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2', 'Maximum core cross-sectionwithout wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2', 'Housing materialPBT', 'Sensing facePBT', 'Degree of protectionIP68'


×

Call for Price

I agree to my email being stored and used to receive the newsletter.