Inductive sensor NJ15-M1K-A2

pepperl

$180.00

'General specifications', 'Switching functioncomplementary', 'Output typePNP', 'Rated operating distance15 mm', 'Installationnon-flush', 'Output polarityDC', 'Assured operating distance0 ... 12.15 mm', 'Reduction factor rAl 0.39', 'Reduction factor rCu 0.36', 'Reduction factor r304 0.73', 'Output type4-wire', 'Nominal ratings', 'Operating voltage10 ... 60 V DC', 'Switching frequency0 ... 200 Hz', 'Hysteresistyp. 5 %', 'Reverse polarity protectionyes', 'Short-circuit protectionpulsing', 'Voltage dropâ‰?2.5 V', 'Operating current0 ... 200 mA', 'No-load supply currentâ‰?14.5 mA', 'Time delay before availabilityâ‰?50 ms', 'Operating voltage indicatorLED, green', 'Switching state indicatorLED, yellow', 'Functional safety related parameters', 'MTTFd932 a', 'Mission Time (TM)20 a', 'Diagnostic Coverage (DC)0 %', 'Compliance with standards and directives', 'Standard conformity', 'StandardsEN 60947-5-2:2007 IEC 60947-5-2:2007', 'Approvals and certificates', 'UL approvalcULus Listed, General Purpose', 'CCC approvalCertified by China Compulsory Certification (CCC)', 'Ambient conditions', 'Ambient temperature-25 ... 70 °C (-13 ... 158 °F)', 'Mechanical specifications', 'Connection typescrew terminals', 'Information for connectionA maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %', 'Core cross-sectionup to 2.5 mm2', 'Minimum core cross-sectionwithout wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2', 'Maximum core cross-sectionwithout wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2', 'Housing materialPBT', 'Sensing facePBT', 'Degree of protectionIP67'


×

Call for Price

I agree to my email being stored and used to receive the newsletter.