Inductive sensor NBN40-U1-UU

pepperl

$205.00

'General specifications', 'Switching functionNormally open/closed (NO/NC)', 'Output typeTwo-wire', 'Rated operating distance40 mm', 'Installationnon-flush', 'Output polarityAC/DC', 'Assured operating distance0 ... 32.4 mm', 'Actual operating distance36 ... 44 mm typ. 40 mm', 'Reduction factor rAl 0.37', 'Reduction factor rCu 0.3', 'Reduction factor r304 0.73', 'Reduction factor rFe 1', 'Reduction factor rBrass 0.4', 'Output type2-wire', 'Nominal ratings', 'Switching frequencyAC, 0 ... 30 HzDC, 0 ... 100 Hz', 'Hysteresis1 ... 10 typ. 5 %', 'Reverse polarity protectionreverse polarity tolerant', 'Short-circuit protectionpulsing', 'Voltage dropâ‰?5 V (typ. 2V) DC operation â‰?8 V (typ. 3 V) AC operation', 'Momentary current(20 ms, 0.1 Hz)0 ... 3000 mA', 'Operating current5 ... 500 mA', 'Off-state currentâ‰?1.5 mA', 'Time delay before availabilityâ‰?300 ms', 'Operating voltage indicatorLED, green', 'Switching state indicatorLED, yellow', 'Error indicatorflashes when overcurrent', 'Functional safety related parameters', 'MTTFd540 a', 'Mission Time (TM)20 a', 'Diagnostic Coverage (DC)0 %', 'Electrical specifications', 'Rated operating voltage24 ... 250 V DC / 24 ... 230 V AC', 'Operating voltage20 ... 300 V DC / 20 ... 253 V AC', 'Compliance with standards and directives', 'Standard conformity', 'StandardsEN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012', 'Approvals and certificates', 'Protection classII', 'Rated insulation voltage230 V', 'Rated impulse withstand voltage2.5 kV', 'UL approvalcULus Listed, General Purpose 'For use in NFPA 79 Applications only' For overcurrent protection, install a fuse with a rated current of max. 3 A and at least 300 V AC/DC', 'CCC approvalUe 75VDC - 250VDC Ue 75VAC - 230VAC', 'Ambient conditions', 'Ambient temperature-25 ... 85 °C (-13 ... 185 °F)', 'Storage temperature-25 ... 85 °C (-13 ... 185 °F)', 'Mechanical specifications', 'Connection typeterminal compartment', 'Information for connectionA maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %', 'Core cross-sectionup to 2.5 mm2', 'Minimum core cross-sectionwithout wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2', 'Maximum core cross-sectionwithout wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2', 'Housing materialPA 6.6 / metal', 'Sensing facePA 6.6', 'Housing baseplastic', 'Degree of protectionIP67'


×

Call for Price

I agree to my email being stored and used to receive the newsletter.