Inductive sensor NBN40-U1-A2



'General specifications', 'Switching functioncomplementary', 'Output typePNP', 'Rated operating distance40 mm', 'Installationnon-flush', 'Output polarityDC', 'Assured operating distance0 ... 32.4 mm', 'Reduction factor rAl 0.31', 'Reduction factor rCu 0.3', 'Reduction factor r304 0.74', 'Reduction factor rBrass 0.39', 'Output type4-wire', 'Nominal ratings', 'Operating voltage10 ... 30 V DC', 'Switching frequency0 ... 180 Hz', 'Hysteresistyp. 5 %', 'Reverse polarity protectionreverse polarity protected', 'Short-circuit protectionpulsing', 'Voltage dropâ‰?2 V', 'Operating current0 ... 200 mA', 'Off-state current0 ... 0.5 mA', 'No-load supply currentâ‰?20 mA', 'Time delay before availability80 ms', 'Operating voltage indicatorLED, green', 'Switching state indicatorLED, yellow', 'Functional safety related parameters', 'MTTFd1057 a', 'Mission Time (TM)20 a', 'Diagnostic Coverage (DC)0 %', 'Compliance with standards and directives', 'Standard conformity', 'StandardsEN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012', 'Approvals and certificates', 'EAC conformityTRxa0CU 020/2011', 'UL approvalcULus Listed, General Purpose', 'CCC approvalCCC approval / marking not required for products rated â‰?6 V', 'Ambient conditions', 'Ambient temperature-25 ... 85 °C (-13 ... 185 °F)', 'Storage temperature-40 ... 85 °C (-40 ... 185 °F)', 'Mechanical specifications', 'Connection typescrew terminals', 'Information for connectionA maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %', 'Core cross-sectionup to 2.5 mm2', 'Minimum core cross-sectionwithout wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2', 'Maximum core cross-sectionwithout wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2', 'Housing materialPA/metal with epoxy powder coating', 'Sensing facePA', 'Housing baseplastic', 'Degree of protectionIP68 / IP69K', 'Mass225 g', 'NoteTightening torque: 1.8 Nm (housing)'


Call for Price

I agree to my email being stored and used to receive the newsletter.